Alpine PDX-2.150 Specifications: - 100 watts RMS x 2 at 4 ohms
- 200 watts RMS x 2 at 2 ohms
- 400 watts RMS x 1 bridged output
- stereo or bridged mono output
- Tri-way capable (Tri-Way Crossover required)
- MOSFET power supply
- requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- 40-amp fuse
- 50-750 Hz high-pass/50-120 Hz low-pass crossover, 18 dB/octave
- 18 dB bass boost at 50 Hz (switchable on/off)
- variable (20-50 Hz) subsonic filter
- preamp outputs
- cooling fan
- cobalt blue illumination
- speaker- and preamp-level inputs
- 11-5/16"W x 2-3/8"H x 10-7/8"D
- 1-year warranty
Regular Price $429 Our Price Only $389
Audiopipe GM1002 Specifications: - 75 watts x 2 @ 4 ohms stereo
- 150 watts x 2 @ 2 ohms stereo
- 225 watts x 2 @ 1 ohm stereo
- 150 watts x 1 @ 4 ohms mono
- 300 watts x 1 @ 2 ohms mono
- 600 watts x 1 @1 ohms mono
- High Current Circuitry
- PWM MOSFET Power Supply
- Double Sided Glass Epoxy Circuit Board
- S/N Ratio: >100dB
- Frequency Response: 10Hz - 40KHz (± 1dB)
- Remote Bass Control with Blue Backlight Knobs
- Variable 24dB Hi-pass Crossover: 50Hz - 750Hz
- Variable 24dB Low-pass Crossover: 30Hz - 120Hz
- Variable Subsonic Filter: 20Hz to 45Hz
- Variable Bass Boost: 0-18dB
- Variable Bass Boost Frequency: 40Hz-100Hz
- RCA Throughput Connections
- 4-way Protection Circuitry: Thermal, Short Circuit, Overload & DC Offset
- Dual Cooling Fans
- VU Meters Indicating Output Response
- Cobalt Blue Illumination
- High Gloss Chrome Plated Finish
- Dimensions (H x W x D): 3 11/16" x 12" x 14"
Regular Price $229 Our Price Only $139
Clif Designs CD200A Specifications:  - 540 Watt 2 Channel Amplifier
- 2 x 80 Watts RMS @ 4ohms
- 2 x 110 Watts RMS @ 2ohms
- 1 x 220 Watts RMS @ 4ohms
- Regulated Power Supply
- Soft Start Circuitry
- 3-Way Short Circuit Protection
- Variable Frequency LPF 40Hz-120Hz
- Variable Frequency HPF 120Hz-800Hz
- Variable Bass Boost 0dB to 18dB
- Full MOSFET Circuitry
0.02% T.H.D. - S/N Radio > 100dB
- Channel Separation 65dB
- Frequency Response: +/- 1dB 10Hz-40kHz
- Damping Factor 150
- 4 Gauge Silver Power Connectors
- Cooling Fans
- VU Meters
- Silver Plated RCA Input/Output Connectors
- Recessed Sound Adjustment Controls
- Dimensions: (LWH) 10.2" x 12.1" x 2.5"
Regular Price $ 359 Our Price Only $289
Clif Designs CD400A Specifications: - 1000 Watt 2 Channel Amplifier w' Remote
- 2 x 150 Watts RMS @ 4ohms
- 2 x 230 Watts RMS @ 2ohms
- 1 x 450 Watts RMS @ 4ohms
- Regulated Power Supply
- Soft Start Circuitry
- 3-Way Short Circuit Protection
- Variable Frequency LPF 40Hz-120Hz
- Variable Frequency HPF 120Hz-800Hz
- Variable Bass Boost 0dB to 18dB
- Full MOSFET Circuitry
0.02% T.H.D. - S/N Radio > 100dB
- Channel Separation 65dB
- Frequency Response: +/- 1dB 10Hz-40kHz
- Damping Factor 150
- 4 Gauge Silver Power Connectors
- Cooling Fans
- VU Meters
- Silver Plated RCA Input/Output Connectors
- Recessed Sound Adjustment Controls
- Dimensions: (LWH) 13.7" x 12.1" x 2.5"
Regular Price $ 429 Our Price Only $359
Coustic 401SE Specifications: - Balanced Darlington Drive Circuitry
- Bi-Polar Output Transistors
- Fully Adjustable Crossover Frequencies
- Wide Range Input Sensitivity Adjustment
- Soft-start and Muted Turn-off
- Thermal, Over Current, Short Circuit, and DC Offset Protection
- Power / protect indicator
- Polished Aluminum Heat Sink
- Carbon Fiber Finish Heat Shield
Regular Price $ 229 Our Price Only $159
Hifonics NX400 Specifications: - 100 Watts x 2 RMS Power @ 4 Ohms
- 400 Watts x 1 Bridged RMS Power @ 4 Ohms
- 10-30,000 Hz Frequency Response
- 95 dB Signal to Noise Ratio
- 0.05% THD at 4-Ohm RMS Power
- 0 - 18 dB Bass Boost
- Built-In Crossovers: HP/LP
- High Speed, High Voltage Output Devices
- New 20th Anniversary HiFonics Heat Sink
- PWM Mosfet Power Supply
- Variable High-Pass / Low-Pass Crossover
- Full-Range Line Output
- Gold-Plated Terminal Block Power and Speaker Connectors
- 3-Way On-Board Diagnostic
- Optional HFR1 Remote Bass Boost
Regular Price $ 359 Our Price Only $259
Kicker KX450.2 Specifications: - 150 watts RMS x 2 at 4 ohms (225 watts RMS x 2 at 2 ohms)
- 450 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
- variable high- and low-pass filters (50-200 Hz, 12 dB per octave)
- bass boost (0-18 dB at 40 Hz)
- speaker- and preamp-level inputs
Tri-way capable (Tri-Way Crossover required) - preamp outputs
- wired remote level control with 20' cable
- CEA-2008 compliant
- fuse rating: 30A x 2
- requires 4-gauge power and ground leads — wiring and hardware not included with amplifier
- 19-5/16"W x 2-9/16"D x 9-15/16"D
Regular Price $ 429 Our Price Only $349
Legacy LA560SL Specifications: - Bridgeable
- 2 Ohm Stable
- Adjustable Base Boost
- Triple Circuit Protection
- Adjustable Electronic Crossover (Rear): Variable Hi/Low
- High/Low Level MOLEX Connections
- Number of Channels: 2
- Power per Channel: 400W x 2
- Output Bridged: 800W x 1
- Minimum Impedance: 2 Ohms
- Inputs: Hi/Low
- S/N Ratio: 95 dB
- Frequency Response: 20-25 kHz
- Dimensions (H x W x D): 2.25'' x 10.25'' x 10''
Regular Price $ 359 Our Price Only $259
MTX Thunder 282 Specifications: - 70 watts RMS x 2 at 4 ohms
- 140 watts RMS x 2 at 2 ohms
- 280 watts RMS x 1 bridged output at 4 ohms
- stereo or bridged mono output
- 4-ohm stable in bridged mode
- Tri-way capable (Tri-Way Crossover required)
- requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- PWM MOSFET switching power supply
- Intelligent Surface Mount Technology for cleaner sound and greater reliability
- selectable 85 Hz high-pass/low-pass crossovers, 18 dB/octave
- preamp outputs
- speaker-level inputs with SmartEngage
(turns the amp on when it detects signal from the receiver, eliminating the need for a separate turn-on lead from your receiver) - 9-7/16"W x 2-3/8"H x 9-3/4"D
- 1-year warranty
Regular Price $ 229 Our Price Only $169
Phoenix Gold Octane-R 4.0:2 Specifications: - 125W x 2(4 ohm stereo)
- 400W x 1(4 ohm bridged)
- 2 channel power amplifier
- 12dB HP/LP fixed crossovers
- Full range aux output
- Grained aluminum insert
- Carbon fiber badge, backlit with blue LED
- Optional neon inserts for all amp models
- Overload and comparator circuitry
- Full range thru output
- Remote monitoring Display (RMD) port
- twin "T" bass circuitry at 45Hz
- Load stability: 2O Stereo, 4O Mono
- Dimensions (L x W x H):11.75" x 10.875" x 2.25"
Regular Price $ 159 Our Price Only $109
Power Acoustik OV2520 Specifications: - 2 x 125 Watts Max At 4 Ohms
- 2 x 150 Watts RMS At 2 Ohms
- 1 X 300 Watts RMS Mono
- 1 x 520 Watts Max Bridged
- Super Cool Blue LED
- Chrome Top Plate Panel
- Full Mosfet Power Supply
- PWM Circuitry
- Full Selectable Crossover Hi/Full/Low
- Three Way Protection Circuit
- Tri-Mode Capable
- Variable Low Pass 40Hz-120Hz
- Variable Hi Pass 150Hz-1.5Khz
- 18dB Bass Boost @ 40Hz.
- Frequency Response: 10Hz to 30Khz
- S/N Ratio:97 db
- THD: 0.02%
- 2ohm Stable Stereo
- System Distress Indicator
- High/Low Level inputs With Floating Ground
Regular Price $ 159 Our Price Only $109
SPL CRM4002 Specifications: - 2 x 85 Watts @ 4 Ohm stereo
- 2 x 105 Watts @ 2 Ohm stereo
- 1 x 400 Watts @ 4 Ohm mono
- 18 dB bass boost at 40Hz
- 8.5" L x 11.25" W x 2.25" H
- Full MOSFET power supply
- 2 Ohm Stereo stable
- Tri-Mode capable
- THD: 0.02%
- S/N Ratio: >97 dB
- Full selectable crossover Hi/Full/Low
- 3 way protection circuit
- Variable Low-pass crossover: 40Hz - 120Hz
- Variable Hi-pass crossover: 40Hz - 120Hz
- Bass boost: 40Hz: 0/18dB
- PWM circuitry
- 4 Power / Ground connectors
Regular Price $ 159 Our Price Only $109
Audiobahn A4004T Specifications: - 50 watts RMS x 4 at 4 ohms
- 100 watts RMS x 4 at 2 ohms
- 200 watts RMS x 2 bridged output
- 4-, 3-, or 2-channel operation
- Tri-way capable (Tri-Way Crossover required)
- MOSFET power supply
- requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- two 20-amp fuses
- 50-750 Hz high-pass/50-120 Hz low-pass crossover, 18 dB/octave
- separate, selectable bass boosts on front and rear channels (+18 dB at 50 Hz)
- variable (20-50 Hz) subsonic filter
- cooling fan
- cobalt blue illumination
- speaker- and preamp-level inputs
- 11-5/16"W x 2-7/16"H x 11-3/4"D
- 1-year warranty
Regular Price $ 259 Our Price Only $199
Clif Designs CD600A Specifications: - 1040 Watt 4 Channel Amplifier w' Remote
- 4 x 90 Watts RMS @ 4ohms
- 4 x 120 Watts RMS @ 2ohms
- 2 x 240 Watts RMS @ 4ohms
- Regulated Power Supply
- Soft Start Circuitry
- 3-Way Short Circuit Protection
- Variable Frequency LPF 40Hz-120Hz
- Variable Frequency HPF 120Hz-800Hz
- Variable Bass Boost 0dB to 18dB
- Full MOSFET Circuitry
- 0.02% T.H.D.
- S/N Radio > 100dB
- Channel Separation 65dB
- Frequency Response: +/- 1dB 10Hz-40kHz
- Damping Factor 150
- 4 Gauge Silver Power Connectors
- Cooling Fans
- VU Meters
- Silver Plated RCA Input/Output Connectors
- Recessed Sound Adjustment Controls
- Dimensions: (LWH) 15.7" x 12.1" x 2.5"
Regular Price $ 529 Our Price Only $399
Clif Designs CD4.4LX Specifications: - 1400 Watt 4 Channel Amplifier
- 4 x 100 Watts RMS @ 4ohms
- 4 x 150 Watts RMS @ 2ohms
- 4 x 175 Watts RMS @ 1ohm
- 2 x 700 Watts MAX @ 2ohms
- 2 Ohm Mono Stable
- Double-sided Military Grade PCB Board
- Regulated Power Supply
- Soft Start Circuitry
- Full MOSFET Circuitry
- 4-Way Short Circuit Protection
- Variable Frequency LPF 40Hz-120Hz
- Variable Frequency HPF 120Hz-800Hz
- Variable Bass Boost 0dB to 18dB
- Frequency Response: +/- 1dB 10Hz-40kHz
- 0.02% T.H.D.
- S/N Radio > 100dB
- Channel Separation 70dB
- Silver Plated RCA Input/Output Connectors
- Damping Factor 200
- 4 Gauge Silver Power Connectors
- Dimensions: (LWH) 16.5" x 10" x 2.1"
Regular Price $ 549 Our Price Only $379
Coustic 481QE Specifications: - Triple Darlington Drive Circuitry
- Bi-Polar Output Transistors
- Fully Adjustable Crossover Frequencies
- Adjustable Bass Boost
- Remote Subwoofer Level Control Ready
- Wide Range Input Sensitivity Adjustment
- Soft-start and Muted Turn-off
- Thermal, Over Current, Short Circuit, and DC Offset Protection
- Power / Protect Indicator
- Polished Aluminum Heat Sink
- Carbon Fiber Finish Heat Shield
Regular Price $ 259 Our Price Only $179
Hifonics NX880 Specifications: - High Speed, High Voltage Output Devices
- New 20th Anniversary HiFonics Heat Sink
- PWM Mosfet Power Supply
- Dual Variable High-Pass / Low-Pass Crossovers
- Variable Bass Boost at 40 Hz
- 2 / 4 Channel Input Selector
- Full-Range Line Output
- Gold-Plated Terminal Block Power and Speaker Connectors
- 3-Way On-Board Diagnostic
- Amplifier Type: Multi-Channel
- RMS Power: 100W x 4 @ 4 Ohms
- RMS Power: 200W x 4 @ 2 Ohms
- Bridged RMS Power: 400W x 2 @ 4 Ohms
- THD at Rated RMS Power: <0.03%
- Preamp Outputs: Yes
- Built-In Crossovers: HP/LP
- Bass Boost: 0 - 18 dB
- Frequency Response: 10-30,000 Hz
- Channel Separation: >70 dB
- Signal to Noise Ratio: >95 dB
Regular Price $ 359 Our Price Only $219
Kicker KX650.4 Specifications: - 120 watts RMS x 4 at 4 ohms (170 watts RMS x 4 at 2 ohms)
- 325 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
- cooling fan
- 2-, 3-, or 4-channel output
- CEA-2008 compliant
- Tri-way capable (Tri-Way Crossover required)
- speaker- and preamp-level inputs
- variable front and rear high-/low-pass crossovers
(variable 50-200 Hz, 12 dB per octave) - variable bass boost (0-18 dB) centered at 40 Hz with wired remote control
- three-way protection circuitry
- requires 4-gauge power and ground leads and an 80-amp fuse — wiring
and hardware not included with amplifier - 22-1/2"W x 2-9/16"H x 9-15/16"D
Regular Price $ 629 Our Price Only $479
Legacy LA680 Specifications: - 4 x 35 Watts RMS @ 4 Ohms
- 4 x 55 Watts RMS @ 2 Ohms
- 4 x 250 Watts Max Output
- 2 x 500 Watts Bridge Mode
- Polished Chrome Finish w/Plexiglass Panel
- Soft Turn On/Off Circuit
- Variable Gain Control
- Remote Turn On/Off
- Hi/Low Level Inputs
- Power On LED Indicator
- Fully Adjustable Electronic Cross Over Network
- Remote Control Bass Boost (0-18dB @ 60Hz)
- 2 Ohm Stereo Stable
- Bridgeable Into 4 Ohms
- MOSFET PWM Power Supplies
- LED Protection Indicator
- Frequency Response: 10-30 kHz
- Power Supply Voltage: 14.4 VDC/NRG GD (10.5-16V)
- Maximum Current Draw: 20A
- Dimensions: 11.5W'' x 2''H x 12''L
Regular Price $ 259 Our Price Only $199
MTX Thunder 3404 Specifications: - 4-channel car amplifier
- 50 watts RMS x 4 at 4 ohms (100 watts x 4 at 2 ohms)
- 200 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode)
- fan cooling with XTC thermal regulation technology
- Prizm EFX customizable lighting accents
- selectable high-/low-pass filter (85 Hz at 12 dB per octave high-pass, and 24 dB per octave low-pass)
- MOSFET power supply and output stages
- CEA-2008 compliant
- speaker-level inputs with Smart Engage
- preamp inputs and outputs
- fuse rating: 20A x 2
- requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- 12-11/16"W x 2-1/2"H x 9-5/8"D
- warranty: 1 year
Regular Price $ 329 Our Price Only $259
Phoenix Gold Octane-R.8:04 Specifications: - 125W x 4 (4 ohm stereo)
- 400W x 2(4 ohm bridged)
- Grained aluminum insert
- Carbon fiber badge, backlit with blue LED
- Optional neon inserts for all amp models
- Overload and comparator circuitry
- Full range thru output
- Remote monitoring Display (RMD) port
- Twin "T" bass circuitry at 45Hz
- Load stability: 2O Stereo, 4O Mono
- 4 channel power amplifier
- 12dB HP/LP variable crossovers
- Full range aux output
- Dimensions (L x W x H): 15.75" x 10.875" x 2.25"
Regular Price $ 259 Our Price Only $199
Power Acoustik OV4600 Specifications: - 4 x 70 watts into 4 ohms RMS
- 4 x 85 watts into 2 ohms RMS
- MOSFET power supply
- High/full/low selectable crossover
- 40 Hz 18 dB bass boost
- 3-way protection circuit
- High/low level inputs with floating ground
- Gold-plated RCA connectors
Regular Price $ 229 Our Price Only $139
SPL CRM6004 Specifications: - 85 watts RMS x 4 into 2 ohms
- 170 watts RMS x 2 into 2 ohms
- 600 watts maximum power in bridged mode
- Selectable crossover settings for full-range, high pass (150 to 1500 Hz) or low pass (40 to 120 Hz)
- Bass boost of 18 dB at 40 Hz
- 10 Hz to 30 Khz frequency response
- Total harmonic distortion of less than 0.02%
- Signal-to-noise ratio of 97 dB
- Die-cast aluminum heat sink
- 3-way protection with system distress indicator
- Tri-mode capability lets you power 2 speakers and a subwoofer
- Gold-plated line level inputs (from preamp outputs)
- High level inputs (from speaker outputs)
- Line level output
- 4-gauge power and ground connections
- 11.25"L x 11.25"W x 2.25"H
Regular Price $ 189 Our Price Only $129
Audiobahn A8001DT Specifications: - 300 watts x 1 @ 4 ohms mono
- 500 watts x 1 @ 2 ohms mono
- 800 watts x 1 @ 1 ohm mono
- Class D Circuitry
- Multi Stranded Power Supply Toroids
- Double Sided Glass Epoxy Circuit Board
- THD: 0.05%
- S/N Ratio: >100dB
- Frequency Response: 10Hz - 40KHz (± 1dB)
- Remote Bass Control with Blue Backlight Knobs
- Variable 18dB Low-pass Crossover: 50Hz - 250Hz
- Variable Bass Boost: 0 - 18dB
- Variable Bass Boost Frequency: 40Hz - 100Hz
- Subsonic Filter: 20Hz to 50Hz
- Variable Phase Control: 0° - 180°
- Large Display Volt Meter with Blue Illumination
- RCA Throughput Connections
- 4-way Protection Circuitry: Thermal, Short Circuit, Overload & DC Offset
- Dual Cooling Fans
- Cobalt Blue Illumination
- Chrome Flame Fan Grille
- High Gloss Chrome Plated Finish
- Dimensions (H x W x D): 2.5" x 11 15/16" x 13 1/8"
Regular Price $ 429 Our Price Only $309
Clif Designs CD600A Specifications: - 1040 Watt Mono Channel Amplifier w' Remote
- Regulated Power Supply
- Soft Start Circuitry
- 3-Way Short Circuit Protection
- Variable Frequency LPF 40Hz-120Hz
- Variable Frequency HPF 120Hz-800Hz
- Variable Bass Boost 0dB to 18dB
- Full MOSFET Circuitry
- 0.02% T.H.D.
- S/N Radio > 100dB
- Channel Separation 65dB
- Frequency Response: +/- 1dB 10Hz-40kHz
- Damping Factor 150
- 4 Gauge Silver Power Connectors
- Cooling Fans
- VU Meters
- Silver Plated RCA Input/Output Connectors
- Recessed Sound Adjustment Controls
- Dimensions: (LWH) 15.7" x 12.1" x 2.5"
Regular Price $ 559 Our Price Only $419
Coustic 401DB Specifications: - High-Efficiency Class D Circuitry
- Mosfet Power Supply Transistors
- 36 dB / Octave Low-Pass Crossover
- Fully Adjustable 40-200 Hz Crossover Frequency
- Switchable 36 dB / Octave Subsonic Filter
- Adjustable Bass Boost
- Wide Range Input Sensitivity Adjustment
- Soft-start and Muted Turn-off
- Thermal, Over Current, Short Circuit, and DC Offset Protection
- Power / Protect Indicator
- Remote Level Control Capable
- Polished Aluminum Heat Sink
- Carbon Fiber Finish Heat Shield
Regular Price $ 229 Our Price Only $189
Hifonics MERLIN Specifications: - Compact Chassis -Only 7.6" Wide
- Super Efficient Class D Technology
- Warrior Design HiFonics Heat Sink
- Simpatico Coil Design(SPC) Toroid Transformer
- PWM Mosfet Power Supply
- Variable Low-Pass Crossover
- Selectable 12 / 24dB Crossover Slope
- Variable 18 dB / Octave Subsonic Filter
- Variable Bass Boost at45 Hz
Regular Price $ 229 Our Price Only $159
MTX Thunder421D Specifications: - 210 watts x 1 at 4 ohms (at 14.4 volts)
- 420 watts x 1 at 2 ohms (at 14.4 volts)
- requires 8-gauge power and ground leads — wiring and hardware not included with amplifier
- Adaptive Class D Technology
- variable 40-200 Hz low-pass crossover, 24 dB/octave
- preamp outputs
- PWM MOSFET switching power supply
- gain control
- Thunder EQ bass boost (0-18 dB at 40 Hz)
- speaker-level inputs with SmartEngage
(turns on the amp when it detects signal from the receiver, eliminating the need for a turn-on lead) - 9-11/16"W x 2-5/16"H x 9-13/16"D
- 1-year warranty
Regular Price $ 219 Our Price Only $179
Power Acoustik A1800DB Specifications: - Ultra-Efficient Class D Circuitry
- Fully Regulated PWM Mosfet Power Supply
- 1 Ohm Stable - 1400 Watts RMS Into A 1 Ohm Load
- Variable 50-150 Hz Low-Pass Crossover
- Variable 15-40 Hz Subsonic Filter
- 0-180 Degree Phase Control
- Variable Bass EQ at 45 Hz
- Remote Level Control Included
- 4-Way Protection Circuit
- Gold-Plated Input and Speaker Terminals
- RCA Outputs
Regular Price $ 379 Our Price Only $289 |